RT-J2534 Online Scaner & Flasher

🔌 RT-J2534 Online Scaner & Flasher

Browser connects to local RT_J2534_Agent.exe on this PC.

Checking Agent access...

📥 Download latest Agent

Quick start

Connect the J2534 adapter to the vehicle and turn ignition ON.
Press Check Agent, then select the adapter DLL and CAN speed.
Press Scan Vehicle. The scanner detects the VIN/profile and shows supported functions.

Connection

Agent not checked

J2534 adapter DLL

CAN speed

ECM Identification 07E0 / 07E8

Vehicle profile not selected

VIN

Engine / ECM Type

Model Year

Software Version

Calibration Part Number

Hardware Number

ESN

AUTOMATIC ECU PROGRAMMING

Isuzu Automatic Flasher

The prepared file set, ECU protocol and complete programming sequence are selected automatically by Software Part Number. RT J2534 Agent performs the real write through your connected J2534 adapter and reports completion automatically.

ORIGINAL

Write the prepared stock calibration set automatically.

$50.00 USD

DELETE

Write the prepared DELETE calibration set automatically.

$400.00 USD

Keep a stable power supply connected until the green programming-complete message appears.

No prepared set selected.

DCU Identification auto: 024B/064B or 07E3/07EB

Status

Not scanned

Software Part Number

Internal ID

Hardware Part Number

AUTOMATIC DCU PROGRAMMING

Isuzu DCU Automatic Flasher

The matching DCU17HD01 set is selected automatically by DCU Software Part Number. RT J2534 Agent writes the prepared files through your connected adapter and reports completion automatically.

✓ Software-matched files✓ DCU17HD01 protocol✓ Automatic programming sequence

Scan the DCU to match a prepared DCU17HD01 programming set by Software Part Number.

ORIGINAL

Write the prepared stock DCU calibration set automatically.

$50.00 USD

DELETE

Write the prepared DELETE DCU calibration set automatically.

$150.00 USD

Keep a stable power supply connected until the green programming-complete message appears, then switch the ignition key OFF.

No prepared DCU set selected.

DPF Dashboard

ECM DPF Reset uses the confirmed 2011 IDSS Slow Regeneration completion command. It is separate from all DCU data resets.

Press Read DPF Data.

DTC(s) / IDSS Native

Read DTC repeats IDSS native exchange.

DTC Totals

IDSS style module list

Module	DTC / Description	Status	Raw
Press Read DTC.

Vehicle Speed Limit

Isuzu IDSS parameter 1A 3E / 3B 3E. Security key is calculated with the SH725XX ROM formula verified against captured IDSS pairs.

Vehicle Speed Limit Coding

One paid coding operation

$20.00 USD

Read the current limit first.

Isuzu DCU Data Resets — 2020 / Legacy

Captured IDSS 2020 profile. Reset uses DCU 024B / 064B first and 07E3 / 07EB fallback, without an identification guard. Ignition ON, engine stopped.

Select a reset. Every command must receive DCU response EE 4B.

HINO DX3 Service Functions

Functions are enabled only after a Hino VIN/profile is detected.

Hino DTC / Service Result

Universal diagnostic profile HINO_DX3

Select a Hino function.

Volvo PTT VERSION4 / FH

Volvo PTT 29-bit ISO15765 profile captured on the FH test bench. Service operations require ignition ON and engine stopped.

Volvo DTC

EMS / UDS 19 02 29

Scan the vehicle, then read DTC.

Mitsubishi FUSO — Emission Data

Fresh one-shot Xentry-style values. DPF, BlueTec, NOx and Development data are read without a repeating monitor loop.

Press Read DPF / BlueTec / NOx / Dev.

Mitsubishi FUSO — DTC

Xentry-compatible Engine ECU fault memory: UDS 19 02 0D.

FUSO Engine ECU DTC

FUSO_EDC17CP52 / UDS 19 02 0D

Press Read FUSO DTC.

Mitsubishi FUSO — Bench Force Resets

Direct captured Xentry sequences. Factory operating-condition limits do not block these bench operations.

Select the required reset.

Mercedes-Benz Truck EU

MB_TRUCK_EU profile is enabled after Scan Vehicle detects a Mercedes-Benz truck. Use with ignition ON and engine stopped.

Mercedes-Benz Truck EU Result

MB_TRUCK_EU / UDS 29-bit modules

Select a Mercedes-Benz Truck EU function.

Mitsubishi FUSO EDC17CP52 — ECM Programmer

Read and program the ECM through J2534. Keep the ECU connected to a stable power supply during the entire operation.

FUSO firmware match

The detected Calibration File ID is matched automatically with available programming files.

WAITING FOR SCAN

ECU Brand: FUSO

ECU Type: EDC17CP52

ID: —

Calibration: —

Scan the ECU to match available database builds.

DELETE (SCR / DPF / EGR)

Programs the ECM directly over CAN through your J2534 adapter. Approximate write time: 2 minutes.

Stage1 + DELETE (SCR / DPF / EGR)

Programs the ECM directly over CAN through your J2534 adapter. Approximate write time: 2 minutes.

Preparing checksum-fixed programming file

Creating checksum task...

QUEUED

1. Task queued

2. Worker accepted

3. Checksum processing

4. CSOK ready

PROGRAM YOUR FILE

Select a calibration read or full dump from this ECU. The correct calibration area is detected and programmed automatically.

$50.00 USD

Stable bench supply is mandatory. Ignition/power must remain ON until the ECU restarts and identification is verified.

Select the 4 MiB calibration-read BIN.

ECM Programmer Status

FUSO EDC17CP52 · READ / WRITE

READY

Connect the ECU and J2534 interface, switch power ON, then select READ or WRITE.

Supported Brands & Functions

Open to see the functions currently available.

J2534 Online